|
|
 |
|
1. |
S.
Indrawati and Subagyo,
2010, Quality Dimension Analysis of High-End Notebook
Products, Prosiding Seminar Nasional IV Manajemen dan
Rekayasa Kualitas, ITENAS, Bandung, pp. 214-220 (in
Bahasa Indonesia). |
|
2. |
E. Febianti and Subagyo,
2010, Model Development of Batch-Continuous Mixed
Production System with Simulation Approach, Prosiding
Seminar Nasional IV Manajemen dan Rekayasa Kualitas,
ITENAS, Bandung, pp. 349-355 (in Bahasa Indonesia). |
|
3 |
I.D. Widodo, A.E. Tontowi, Subagyo,
and Sugiyanto, 2009, Mobile Phone Success Factors
Identification, The 11th International
Conference on QiR (Quality in Research), Faculty of
Engineering, University of Indonesia, F1-S3-4 |
|
4. |
G.A.
Brooks, M.A. Rhamdhani, K.S. Coley, Subagyo,
and Y. Pan, 2009, Transient Kinetics of Slag Metal
Reactions, Metall. Mater. Trans. B, 40B,
353-362. |
|
|
 |
|
|
|
At McMaster, 6 Oct 2002
13:32
Left to right: Dr. Subagyo,
Dr. G.A. Brooks, Mr. O. Kelly |
|
|
5 |
I.D. Widodo, A.E. Tontowi, Subagyo,
and Sugiyanto, 2009, The Role of Shape and Brand in
Product Image, Proceeding of the 2nd Asia-Pasific
Conference on Manufacturing System (APCOMS 2009),
Yogyakarta, pp. VIII.13-18. |
|
6. |
K.S. Coley, G.A. Brooks, M.A.
Rhamdhani, Y. Pan,
and Subagyo, 2009, The interface in slag-metal reactions;
a moving target, Proceedings of VIII Int. Conf.
Molten Slags, Fluxes and Salts, MOLTEN2009, 18-21
Jan 2009. |
|
7. |
I. Widiastuti, Subagyo,
and J. Pardadi, 2009, Activity-Based Cost Estimation for
Prismatic Parts, Prosiding Seminar Nasional Manajemen
Teknologi IX, Program Studi MMT-ITS, Surabaya 14
February 2009, pp. A-20-1-A-20-9 (in Bahasa
Indonesia). |
|
8. |
N.S. Uletika and Subagyo,
2009, A Prediction Model of Product Success Based on
Strategy Canvas, Prosiding Seminar Nasional Teknosim
V, JTMI, Universitas Gadjah Mada, Yogyakarta, pp.
103-108 |
|
9. |
Subagyo,
A.R. Wijaya, and N. Susanto, 2009, Analysis of Product
Characteristics and Prior Knowledge on Learning Behavior
of Office Software, Jurnal Teknik Industri
Universitas Diponegoro, IV(1), 67-77 (in
Bahasa Indonesia). |
|
10. |
S. Liani, B.S. Woko, N.M.E. Normasari,
and Subagyo,
2009, Model Development of Time-Dependent Multi-Phase
Queuing System, J. Mesin & Industri, 6(1),
25-36 (in Bahasa Indonesia). |
|
11. |
S. Indrawati and Subagyo,
2009, Dominant Success Factors on Mid-to-High Class
Notebook, Prosiding Seminar Nasional Teknik Industri
dan Manajemen Industri: Strategic and Performance
Management, ITS-BKSTI-ISTMI, Surabaya, pp. 102-107
(in Bahasa Indonesia). |
|
12. |
E.P.E. Dewi, R. Dharmastiti, and
Subagyo,
2009, Criteria Determination for Vendor Selection using
Conventional and Fuzzy AHP on Franchise Company,
Prosiding Seminar Nasional Teknik Industri dan Manajemen
Industri: Logistic and Supply Chain Management, ITS-BKSTI-ISTMI,
Surabaya, pp. 89-95(in Bahasa Indonesia). |
|
13. |
H. Istiqlaliyah and Subagyo,
2009, Success Factors of High-End Mobile Phone Products,
Prosiding Seminar Nasional Teknik Industri dan
Manajemen Industri: Strategic and Performance Management,
ITS-BKSTI-ISTMI, Surabaya, pp. 35-39(in Bahasa
Indonesia). |
|
14. |
E. Febianti, Subagyo,
and J. Pardadi, 2009, An Analysis of A Batch and
Continuous Production System using Simulation Approach,
Prosiding Seminar Nasional Teknik Industri dan
Manajemen Industri: Quality and Manufacturing Management,
ITS-BKSTI-ISTMI, Surabaya, pp. 62-68(in Bahasa
Indonesia). |
|
15. |
I.D. Widodo, A.E.T. Tontowi, Subagyo,
and Sugiyanto, 2008,
Product Performance
Measurement: A Simple And Integrated Model,
Proceedings of the 9th Asia Pacific Industrial
Engineering & Management Systems Conference,
APIEMS, Bali, pp. 2081-2088. |
|
16. |
E. Riyantiningsih, Subagyo,
and A.R. Wijaya, 2008, The Effect of Whole Body Vertical
Vibration on Visual Inspection Performance, Prosiding
Seminar Nasional Teknologi IV, Part 3, Universitas
Teknologi Yogyakarta, pp. 115-122 (in Bahasa
Indonesia). |
|
17. |
E. Muslimah, Subagyo,
and A.R. Wijaya, 2008, The Load Constant of Revised
NIOSH Equation Determined by Physiology Criteria,
Prosiding Seminar Nasional Teknologi IV, Part 3,
Universitas Teknologi Yogyakarta, pp. 75-81 (in Bahasa
Indonesia). |
|
18. |
B.S. Woko and Subagyo,
2008, Spreadsheet Based Model of Time-Dependent
Multi-Channel Multi-Phase Queuing System, Proceeding
of TeknoSim 2008, Gadjah Mada University, pp. 42-48
(in Bahasa Indonesia). |
|
19. |
H. Lestari, Subagyo,
A.R. Wijaya, 2008, The Effect of Culture on Supply Chain
Performance Beverage Industry, Proceeding of TeknoSim
2008, Gadjah Mada University, pp. 158-164 (in Bahasa
Indonesia). |
|
20. |
D.S. Pinandita and Subagyo,
2008, The Effect of External Variables on Economic Value
Added (EVA), Proceeding of SMART 2008,
Universitas Gadjah Mada, pp.A 178-186 (in Bahasa
Indonesia). |
|
21. |
S. Liani and Subagyo,
2008, A Time-Dependent Queuing Model of Single-Channel
Multi-Phase Condition, Proceeding of SMART 2008,
Universitas Gadjah Mada, pp.A 78-86 (in Bahasa
Indonesia). |
|
22. |
Y.A. Rochman, Subagyo,
and A.M.S. Asih, 2008, Development of Scheduling Model
with Lateness Constraint, Prosiding Seminar Nasional
Perkembangan Riset dan Teknologi di Bidang Industri ke
14, Pusat Studi Ilmu Teknik, Universitas Gadjah
Mada, Yogyakarta, pp. TI-31-37 (in Bahasa Indonesia) |
|
23. |
G.
Brooks, K. Coley, Subagyo,
and Y. Pan, 2007, Transient Kinetics of Slag Metal
Reactions, Proceeding of International Symposium on
Liquid metal Processing and Casting 2007, 2-5 Sept.,
Nancy, France. |
|
24. |
N. Susanto,Subagyo,
and A.R. Wijaya, 2008, Learning Process Evaluation on
New Computer Software using Cognitive Ergonomics
Approach, Proceeding of CAE’08,
Universitas Gadjah Mada, Yogyakarta, pp. 1-6 (in Bahasa
Indonesia). |
|
25. |
S.C.A. Wijaya, A.R. Wijaya, and
Subagyo,
Evaluation of the Transmission of Vibration on Human
Body, Prosiding Seminar Nasional Teknologi IV,
Part 4, Universitas Teknologi Yogyakarta, pp. 100-105
(in Bahasa Indonesia). |
|
26. |
E. Muslimah, Subagyo,
and A.R. Wijaya, 2008, Analysis of Load-Lifting
Capability Based on Back-Bone Compression Force,
Proceeding of CAE’08, Universitas Gadjah
Mada, Yogyakarta, pp. 215-221 (in Bahasa Indonesia). |
|
27. |
I. Pranoto, Z. Taha, K. Mitsui, and
Subagyo,
2007, Acoustic Emission for Monitoring Bearing Defects,
Proceedings of 9th AUN/SEED-NET Field Wise
Seminar on Manufacturing Systems, Department of
Engineering Design and Manufacture, University of
Malaya, Kuala Lumpur, pp. 161-170. |
|
28. |
Subagyo,
H.S.B. Rochardjo,
M.K. Herliansyah, Herianto, and B. Hartono, 2007,
Development of Real-Time Monitoring System for Leather
Quality using Multivariate Image Analysis Technique,
Proceedings of 9th AUN/SEED-NET Field Wise
Seminar on Manufacturing Systems, Department of
Engineering Design and Manufacture, University of
Malaya, Kuala Lumpur, pp. 119-123. |
|
29. |
Subagyo,
2007,
Creative, Low Cost, and Green: Research Strategy for
Techno-Science Area in Beyond Functional Product Era,
Proceeding of “Kemajuan Terkini Penelitian Klaster
Sains-Teknologi 2007”, Universitas Gadjah Mada,
Yogyakarta, pp. 49-56 (Keynote; in Bahasa Indonesia). |
|
30. |
B.B. Nugraha,
Subagyo,
and A.R. Wijaya, 2007, The Effect of Low Frequency Noise
and Vertical Whole Body Vibration on Cognitive
Capability and Bothering Perception, Proceeding of
Seminar Nasional Mesin dan Industri 2007,
Universitas Tarumanegara, pp. 572-577 (in Bahasa
Indonesia). |
|
31. |
V. Malau and
Subagyo,
2007, The Effect of Heat Treatment and TiN Coating on
Wear Rate, Toughness, and Hardness of Duylos 2510 Steel,
Media Teknik, XXIX (3), 206-213 (in Bahasa
Indonesia) |
|
32. |
I.D. Widodo, A.E. Tontowi,
Subagyo,
Sugiyanto, B. Anita, and R. Utami, 2007, The Analysis
of Product Success Factors: A Comparative Study,
Proceeding of the 3rd International
Conference on Product Design and Development,
Yogyakarta, pp. II-81-85. |
|
33. |
H. Purnomo,
Subagyo,
and R. Dharmastiti, 2007, Fatigue Level Classification
based on Heart Rate and Reaction Time, Jurnal Techno
Science, I(2), 98-101 (in Bahasa Indonesia). |
|
34. |
I.D. Widodo, A.E. Tontowi,
Subagyo,
and Sugiyanto, 2007, Quatitative Approach in Product
Design, Proceeding of Seminar Nasional TEKNOIN 2007,
Yogyakarta, pp. B137-142 (in Bahasa Indonesia). |
|
35. |
S.B. Sutono,
Subagyo,
and A. Zuhdi, 2007, A Combination of PCA and Artifical
Neural Network for Causal-Based Forecasting,
Proceeding of SMART 2007, Universitas Gadjah Mada,
Yogyakarta, pp. A90-99 (in Bahasa Indonesia). |
|
36. |
R.S. Marasabessy,
Subagyo,
and A.R. Wijaya, 2007, Frequency Multiplier Factor (FM)
of NIOSH Equation, Proceeding of SMART 2007,
Universitas Gadjah Mada, Yogyakarta, pp. A107-114 (in
Bahasa Indonesia). |
|
37. |
R. Setyaningrum, Subagyo,
and A. Zuhdi, 2007, A Method of Subjective-Feeling
Identification for Upper-Part Body Dominant Workers
using Artificial Intelligence, Jurnal Mesin and
Industri, 4(1), 35-44,
(in Bahasa Indonesia). |
|
38. |
Indro Pranoto, Zahari Taha, Kimiyuki
Mitsui, and Subagyo,
2007, Ball Bearing Defects Monitoring Using Acoustic
Emission Sensor, Proceeding of The Humanoid,
Nanotechnology, Information Technology, Communication
and Control, Environment and Management (HNICEM)
International Conference, The Institute of
Electrical and Electronics Engineers Inc
(IEEE)-Philippine Section, March 15-18, Manila. |
|
39. |
G.Y.A. Magfuri, H.A. Yuniarto, and Subagyo,
2007, Analysis of PCR and PLS Methods for Quality Design
in a Manufacture Industry, Jurnal Mesin dan Industri,
4(2), 97-109, (in Bahasa Indonesia). |
|
40. |
N. Tugaswati and Subagyo,
2007, ANN-Based Causal Forecasting in Industrial
Engineering Applications, Jurnal Mesin dan Industri,
4(2), 110-117, (in Bahasa Indonesia). |
|
41. |
N.E. Wulandari and Subagyo,
2007, A Mathematical Model for Time-Dependent Queuing,
Jurnal Mesin dan Industri, 4(2), 118-127,
(in Bahasa Indonesia). |
|
42. |
O Raliby, Subagyo,
and A.R. Wijaya, 2007, Development of Human Errors
Evaluation Method Based on Cognitive Ergonomics
Approach, Proceeding Seminar Nasional Ergonomi dan K3,
Universitas Diponegoro, Semarang, pp. C15 (in Bahasa
Indonesia. |
|
43. |
E. Muslimah, Subagyo,
and A.R. Wijaya, 2007, Analysis of Load Constant Factor
of The Revised NIOSH Equation, Proceeding Seminar
Nasional Ergonomi dan K3, Universitas Diponegoro,
Semarang, pp. D11-1-8 (in Bahasa Indonesia). |
|
44. |
E. Kusrini and Subagyo,
2007, Performance Measurement of Supply Chain
Management, Proceeding of Industrial Engineering
Conference 2007, Jurusan Teknik Industri, FTI, UPN
‘Veteran’, Yogyakarta, pp.94-98
(in Bahasa
Indonesia). |
|
45. |
R.D.Astuti,
A.R. Wijaya, and Subagyo,
2007, Evaluation of Working Postures Methods for MSD and
Biomechanics Analysis, Prosiding Seminar Nasional
Perkembangan Riset dan Teknologi di Bidang Industri
ke-13, PSIT Universitas Gadjah Mada, Yogyakarta, pp.
5-1:5, (in Bahasa Indonesia). |
|
46. |
H. Purnomo, R. Dharmastiti, and Subagyo,
2007, Fatigue Level of Woman Worker in Garment
Industries, Prosiding Seminar Nasional Perkembangan
Riset dan Teknologi di Bidang Industri ke-13, PSIT
Universitas Gadjah Mada, Yogyakarta, pp. 5-6:11, (in
Bahasa Indonesia). |
|
47. |
I.D. Widodo, A.E. Tontowi, Subagyo,
and Sugiyanto, 2007, The Role of Cognitive Ergonomics in
Product Design and Development: A Preliminary Study,
Proceeding of Industrial Engineering Conference 2007,
Jurusan Teknik Industri, FTI, UPN ‘Veteran’, Yogyakarta,
pp. 144-155
(in Bahasa Indonesia). |
|
48. |
I.D. Widodo, A.E. Tontowi, Subagyo,
and Sugiyanto, 2007, Analysis of Product Failures,
Proceeding of Industrial Engineering Conference 2007,
Jurusan Teknik Industri, FTI, UPN ‘Veteran’, Yogyakarta,
pp. 177-183
(in Bahasa Indonesia). |
|
49. |
P.K. Ariningsih, B.M. Shopa, and
Subagyo,
2007, Analysis the Effect of Vendor-Managed Inventory on
Supply Chain Performance, Jurnal Mesin and Industri,
4(1), 1-14,
(in Bahasa Indonesia). |
|
50. |
I.D.
Widodo and Subagyo,
2006, Customer driven Product Design and Development, Proceeding
of International Seminar on Product Design and
Development 2006, faculty of Engineering, Gadjah
Mada University, Yogyakarta, pp. II-1 to II-6. |
|
51. |
N. Minan and Subagyo, 2006,
In Coping with Global Sourcing, Proceeding of
International Seminar on Product Design and Development
2006, faculty of Engineering, Gadjah Mada
University, Yogyakarta, pp. II-7 to II-12. |
|
52. |
I. Pranoto, Z. Taha, K.
Mitsui, and Subagyo, 2006,
Acoustic Emission Analysis for Bearing Defect
Monitoring, Proceeding of
International Seminar on Product Design and Development
2006, faculty of Engineering, Gadjah Mada
University, Yogyakarta, pp. III-13 to III-19. |
|
53. |
Subagyo
and G.A. Brooks, 2006, Application of Multivariate
Analysis Methods in Metallurgical Industries, Jurnal
Teknik Mesin Indonesia, 1(2), 47-50. |
| 54. |
Subagyo
and N.A. Rakhmawati, 2006, Analysis of Errors in Time
Series Forecasting, Jurnal Mesin dan Industri,
3(3), 47-53 (in Bahasa Indonesia). |
| 55. |
A.N. Taqwantari and
Subagyo,
2006, Forecast Horizon and Data Requirement for
Time-Series Forecasting, Proceeding of TechnoSim 2006,
Faculty of Engineering, Gadjah Mada University,
Yogyakarta, pp. III-1-III-6 (in Bahasa Indonesia). |
| 56. |
A.S. Lucia and
Subagyo,
2006, Causal Forecasting for Industrial Engineering
Application, Proceeding of TechnoSim 2006,
Faculty of Engineering, Gadjah Mada University,
Yogyakarta, pp. III-23-III-32 (in Bahasa Indonesia). |
| 57. |
R. Setyaningrum, A. Zuhdi, and
Subagyo,
2006, Application of Neural Network and Anfis for Worker
Symptom Identification, Proceeding of TechnoSim 2006,
Faculty of Engineering, Gadjah Mada University,
Yogyakarta, pp. I-16-I-24 (in Bahasa Indonesia). |
| 58. |
A.D. Yulianto and
Subagyo,
2006, The Accuracy of Combination Method for Time
Series Forecasting, Jurnal Mesin dan Industri,
3(2), 21-30 (in Bahasa Indonesia). |
| 59. |
Subagyo
and M. Puspitasari, 2006, Cross-Validation Method
for Time Series Forecasting, Proceeding of Seminar on
Application and Research in Industrial Technology,
M&IE-GMU, Yogyakarta (in Bahasa Indonesia). |
|
60. |
S.M.B. Respati,
Subagyo,
and Hermawan, 2006, Water
Droplet Generation through Top Gas Blowing, Jurnal
Mesin dan Industri,
3(1),
33-46 (in Bahasa Indonesia). |
|
61. |
G.
Brooks, Y. Pan, Subagyo,
and K. Coley, 2005, Modeling of Trajectory and Residence
Time of Metal Droplets in Slag-Metal-Gas Emulsions in
Oxygen Steelmaking, Metall.
Mater. Trans. B, 36(4), 525-535. |
| 62. |
Y. Pan, G. Brooks, K. Coley,
and
Subagyo, 2005, Modelling of Metal Droplet Motion in
Slags, Proceeding of Floyd International Symposium on Sustainable Developments in
Metals Processing, M. Nilmani and W.J. Rankin (Eds.),
NCS Associates (Australia) Pty Ltd,
Melbourne, pp.
393-406. |
| 63. |
Subagyo, G.A. Brooks, and K.S. Coley, 2005, Residence Time
of Metal Droplets in Slag-Metal-Gas Emulsions through Top
Gas Blowing, Can. Metall. Q., 44(1), 119-129. |
| 64. |
Subagyo,
and G.A. Brooks, 2005, Application of
Multivariate Analysis Methods in Metallurgical Industries,
Prosiding SNTTN IV, Universitas Udayana, Bali, pp. G4
71-74. |
| 65. |
I. K. Sari and Subagyo,
2005,
Analysis of Data Pattern for Time Series Forecasting, Proceeding
of National Seminar on Product Design and Development 2005,
JTMI-UGM, Yogyakarta. |
| 66. |
S.M.B. Respati, Subagyo,
and
Hermawan, 2005, Initial Velocity of Water Droplet Generated
by Top Gas Blowing, Prosiding Seminar Nasional Riset dan Teknologi
Bidang Material dan Proses, PSIT-UGM, Yogyakarta. |
| 67. |
B. Hartono and Subagyo,
2005,
Mathematical Modeling and Simulation using Spreadsheets, Prosiding Seminar Nasional
Teknologi Simulasi dan Aplikasinya untuk Optimasi Industri,
JTMI FT-UGM, Yogyakarta, pp. 272-277. |
| 68. |
Subagyo,
2005,
The
Role of Chemistry in the Development of Engineering
Science,
Presented at Lokakarya Penyelenggaraan Perkuliahan
Kimia Tahun Pertama di UGM, Jurusan Kimia, FMIPA-UGM,
Yogyakarta, 29 June 2005(Invited). |
| 69. |
Subagyo and
M. Riadi, 2005, Effect of Shape Factor on Particle
Segregation, Prosiding Seminar Nasional
Perkembangan Riset dan Teknologi di Bidang Industri,
Pusat Studi Ilmu Teknik UGM, Yogyakarta, pp. MF28-32
(in Bahasa Indonesia). |
|
70. |
S.B.
Respati,
Subagyo,
and Hermawan, 2005, Characterization of Water
Droplet Generated by Air Blowing, Prosiding Seminar
Nasional Perkembangan Riset dan Teknologi di Bidang
Industri, Pusat Studi Ilmu Teknik UGM, Yogyakarta,
pp. MF23-27 (in Bahasa Indonesia). |
|
71. |
Subagyo,
M. Ikrar, M.K. Herliansyah, H.S.B.
Rochardjo, N.A. Masruroh, and Herianto, 2005, Leather
Dimension Measurement using Multivariate Image Analysis
Method, Jurnal Mesin dan Industri, 2(1),
65-72 (in Bahasa Indonesia). |
|
72. |
A.D. Irawatie and
Subagyo,
2005, Customer Focus Product Development Process in
Consumer Product Industry, Jurnal Mesin dan Industri,
2(3), 75-85 (in Bahasa Indonesia). |
|
73. |
Suhanan,
Subagyo,
B. Hartono, dan W. Niartry, 2005, Development of Forecasting
Algorithm for Industrial Engineering Application, Jurnal
Mesin dan Industri, 2(3), 51-55 (in Bahasa Indonesia).
|
|
74. |
A.M. Sriasih, A.E. Tontowi, H.A. Yuniarto, and
Subagyo, 2004, Learning
Innovation by using Student Volunteer Business
Consulting Division
in Business Consultation Course, Lokakarya Peningkatan Kualitas Pembelajaran dan
Relevansi dengan Dunia Kerja, 30 Sept. 2004, Gadjah Mada
University, Yogyakarta (in Bahasa Indonesia). |
|
75. |
A.E.Tontowi, Aliq, A.M. Sriasih,
Subagyo, N. Ramdhani, and Aswandi, 2004, Industrial
Incubator Based Learning as a Learning Model to Develop
Students Entrepreneurship Capability, Lokakarya
Peningkatan Kualitas Pembelajaran dan Relevansi dengan Dunia
Kerja, 30 Sept. 2004, Gadjah Mada University, Yogyakarta
(in Bahasa Indonesia). |
|
76. |
Subagyo, H. S. B. Rochardjo, M. K. Herliansyah, N. A.
Masruroh, Herianto, dan M.Ikrar, 2004, Leather Quality
Evaluation using Multivariate Image Analysis Method,
Prosiding Seminar Nasional Tahunan Teknik Mesin 2004,
Makasar. (in Bahasa Indonesia) |
|
77. |
A.B. Firmanto and Subagyo, 2004, The Effect of Austempering
on Mechanical Properties of FCD-70 Material, Media Teknika,
4(1), 17-21. (in Bahasa Indonesia). |
|
78. |
Subagyo, 2004, The Strategic Role of Higher Education in
National Character Building, Presented at 22nd
Anniversary
of Widya Mataram Yogyakarta University , 7 October 2004
(Invited) |
|
79. |
Setiyono, J and Subagyo, 2004, Product Redesign of PVC using
Design of Experiment Method, Prosiding Seminar Nasional
Teknologi dan Aplikasi Piping Engineering, Jurusan Teknik
Mesin, Universitas Gadjah Mada, Yogyakarta, pp. 60-64 (in
Bahasa Indonesia). |
|
80. |
G. Brooks, Y. Pan, Subagyo, and K. Coley, 2004, Droplet
Generation and Residence Time in Slag during Top Blown
Oxygen Steelmaking, Proceedings of International Symposium
on Oxygen in Steelmaking, Oxygen in Steelmaking, G.A. Irons
and S. Sun (Eds.), Metsoc, Hamilton, ON, Canada, pp. 37-50. |
|
81. |
Subagyo, N.A. Masruroh, and Y. Suwarno, 2004, A Study of
Particle Segregation based on Single Particle Movement
Caused by Vibration, Prosiding Seminar Nasional Ilmu dan
Teknologi Material (SNITM) 2004, Program Studi Teknik
Material, FTI-ITS, Surabaya, p.6 (in Bahasa Indonesia). |
|
82. |
Subagyo and Ristanto, 2004, Multivariate Statistics Quality
Control: Application of PCA in Food Processing Industry,
Prosiding Seminar Nasional Perkembangan Riset dan Teknologi
di Bidang Industri 2004, Pusat Studi Ilmu Teknik UGM,
Yogyakarta, pp. IV/36-IV/40 (in Bahasa Indonesia). |
|
83. |
Subagyo and F.H. Santoso, 2004, Improvement of Herbal
Medicine Products using PLS-based Statistical Model,
Prosiding Seminar Nasional Perkembangan Riset dan Teknologi
di Bidang Industri 2004, Pusat Studi Ilmu Teknik UGM,
Yogyakarta, pp. IV/20-IV/24 (in Bahasa Indonesia). |
|
84. |
F.Z. Ji, M.A. Rhamdhani, Subagyo, M. Barati, K.S. Coley, G.A.
Brooks, G.A. Irons, and S. Nightingale, 2003, Treatment of
Transient Phenomena in Analysis of Slag-Metal-Gas Reaction
Kinetics, High Temperature Materials and Processes, 22(5-6),
359-367. |
|
85. |
G.A. Brooks and Subagyo, 2003, Ladle Eye Detection using
Multivariate Image Analysis, I&SM, 30(10), 17-21. |
|
86. |
Subagyo and G.A. Brooks, 2003, Online Monitoring of Dynamic
Slag Behavior in Ladle Metallurgy, Iron Steel Inst. Jpn.
Int., 43(8), 1286-1288. |
|
87. |
Subagyo, G.A. Brooks, K.S. Coley, and G.A. Irons, 2003,
Generation of Droplets in Slag-Metal Emulsions through Top
Gas Blowing, Iron Steel Inst. Jpn. Int., 43(7), 983-989. |
|
88. |
Subagyo, 2003, Application of Multivariate Statistics Method
in Industries, Prosiding Seminar Nasional Perkembangan Riset
dan Teknologi di Bidang Industri, Pusat Studi Ilmu Teknik
UGM, Yogyakarta, pp. 252-257 (in Bahasa Indonesia). |
|
89. |
G.A. Brooks and Subagyo, 2003, Ladle Eye Detection using
Multivariate Image Analysis, ISSTech 2003 Conference
Proceedings, ISS, Warrendale, PA, pp. 843-852. |
|
90. |
Subagyo and G.A. Brooks, 2003, Advanced Image Analysis of
Molten Slag for Process Control, Proceedings of Yazawa
International Symposium on Metallurgical and Materials
Processing: Principles and Technology, Vol. I: Materials
Processing Fundamentals and New Technology, F. Kongoli, K.
Itagaki, C. Yamauchi, and H.Y. Sohn (Eds.), TMS, San Diego,
California, USA, pp. 475-483. |
|
91. |
G.A. Brooks and Subagyo, 2003, Interfacial Area in
Pyrometallurgical Reactor Design, Proceedings of Yazawa
International Symposium on Metallurgical and Materials
Processing: Principles and Technology, Vol. I: Materials
Processing Fundamentals and New Technology, F. Kongoli, K.
Itagaki, C. Yamauchi, and H.Y. Sohn (Eds.), TMS, San Diego,
California, USA, pp. 965-974. |
|
92. |
Subagyo, G.A. Brooks, and G.A. Irons, 2003, Spout Eyes Area
Correlation in Ladle Metallurgy, Iron Steel Inst. Jpn. Int.,
43(2), 262-263. |
|
93. |
Subagyo, Brooks, G.A., Sun, S., and Waterfall, S., 2002,
Inferential Model of Desulfurization for Ladle Metallurgy,
ISS 2002 Electric Furnace Conference Proceedings, ISS,
Warrendale, PA, pp. 819-827. |
|
94. |
Subagyo and G.A. Brooks, 2002, An Improved Correlation for
Predicting Terminal Velocity of Droplets and Bubbles in
Slag-Metal-Gas Emulsion, Iron Steel Inst. Jpn. Int., 42(10),
1182-1184. |
|
95. |
S.J. Street, G.A. Brooks, and Subagyo, 2002, Heat Transfer
Considerations in the Bath Smelting of Composite Organic and
Ferrous Wastes, Trans. Instn. Min. Metall. (Sect. C: Mineral
Process. Extr. Metall.), 111/Proc. Australas. Inst. Min.
Metall., 307, C18-24. |
|
96. |
F.Z. Ji, M.A. Rhamdhani, Subagyo, M. Barati, K.S. Coley, G.A.
Brooks, G.A. Irons, and S. Nightingale, 2002, Treatment of
Transient Phenomena in Analysis of Slag-Metal-Gas Reaction
Kinetics, Proceedings of the Mills Symposium, Metals, Slags,
Glasses: High Temperature Properties and Phenomena, Vol. 1,
R.E. Aune and S. Sridar (Eds.), The Institute of Materials,
22-23 August 2002, London, UK, pp. 247-261. |
|
97. |
G.A. Brooks and Subagyo, 2002, Advances in Ladle Metallurgy
Control, Proceedings of the International Symposium on Ladle
and Tundish Metallurgy, K. Coley and G. Brooks (Eds.),
MetSoc, Montreal, Canada, pp. 41-53. |
|
98. |
G.A. Brooks and Subagyo, 2002, Energy Consideration for
Alternative Routes in Metals Production, Green Processing
2002 Conference Proceedings, Cairns, Queensland, Australia,
pp. 281- 286. |
|
99. |
Subagyo, G.A. Brooks, and K.S. Coley, 2002, Interfacial Area
in Top Blown Oxygen Steelmaking, 2002 Ironmaking Conference
Proceedings, ISS, Warrendale, PA, pp. 837-830. |
|
100. |
Subagyo, N. Standish, and G.A. Brooks, 1998, A New Model of
Velocity Distribution of Fluid Flowing in Packed Beds, Chem.
Engng. Sci., 53(7), 1375-1285. |
|
101. |
H. Hasyim, Novial, Subagyo, and W. Setiadharmaji, 1998,
Modelling of Inclusion Removal in a Tundish, FT-UI Seminar
'98 Quality in Research, University of Indonesia, Jakarta. |
|
102 |
Subagyo, 1998, Application of Performance Index as Quality
Measurement for Measuring Performance of R&D Department,
KS-review, 3(2), 68-69 (in Bahasa Indonesia). |
|
103. |
W. Setiadharmaji and Subagyo, 1998, Similarity Criteria: A
Basic Concept for Physical Modelling of Metallurgy Process,
KS-review, 3(1), 1-7 (in Bahasa Indonesia). |
|
104. |
Subagyo, 1997, The Role of Chemical Engineer in the Basic
Research of Iron and Steelmaking Industry, Presented at
BKKMTKI Seminar, Cilegon, 10 pp. (in Bahasa Indonesia,
Invited). |
|
105. |
Subagyo and A.M. Satrio, 1996, Professional Engineer Program
of PII, KS-review, 1(3), 40-42 (in Bahasa Indonesia). |
|
106. |
Subagyo and Murtyastanto, 1996, Progress and Quality of
Technological Studies for Improving Company Competitiveness,
KS-review, 1(2), 31-33 (in Bahasa Indonesia). |
|
107. |
A.M. Satrio and Subagyo, 1996, Chemodynamics View as an
Alternative to Develop the Environmental Standard,
KS-review, 1(2), 11-14 (in Bahasa Indonesia). |
|
108. |
Subagyo, 1995, The Role of Computer Simulation in Steel
Industry, Buletin KS, (3), 24-26 (in Bahasa Indonesia). |
|
109. |
Subagyo, 1995, Mathematical Modelling of the Reduction Zone
of an HYL-III® Reactor, KS-review, 1(1), 11-14 (in Bahasa
Indonesia). |
|
110. |
Subagyo and L. Tjahjono, 1991, Computer Simulation of Oxygen
and Organic Waste Concentration at a River, Prosiding Pekan
Teknik Kimia Nasional, BKKMTKI, Surabaya, 21 pp. (in Bahasa
Indonesia). |
| |
|
|
EDITOR |
|
111. |
Suhanan,
H.S.B. Rochardjo, M.W. Wildan, Subagyo, and
M.K. Herliansyah, 2005 (Eds.), Panduan Penulisan Skripsi dan
Laporan Kerja Praktek, 2nd Edition, Jurusan Teknik
Mesin, Fakultas Teknik,
Universitas Gadjah Mada, Yogyakarta. |
|
112. |
Subagyo, M.K. Herliansyah, A.E. Tontowi, R. Dharmastiti, M.W.
Wildan, E. Widyantoro, M. Iqbal, and R. Ratih (Eds.), 2004,
Prosiding Seminar Nasional Teknologi dan Aplikasi Piping
Engineering, Jurusan Teknik Mesin, Universitas Gadjah Mada,
Yogyakarta, 66 pp., ISBN 979-98888-0-8. |
|
113. |
Suhanan, H.S.B. Rochardjo, Jamasri, Subagyo, and M.K.
Herliansyah, 2004 (Eds.), Panduan Penulisan Skripsi dan
Laporan Kerja Praktek, Jurusan Teknik Mesin, Fakultas Teknik,
Universitas Gadjah Mada, Yogyakarta. |
|
114. |
A.E. Tontowi, H.S.B. Rochardjo, Subagyo, M.K. Herliansyah,
T.A. Rohmat, B.Sucipto, Nurhasim, K. Parwanto, W.T. Hartanto,
R.P. Lestari, and S. Ansyori (Eds.), 2003, Proceedings of
Seminar Autotech 2003, Jurusan Teknik Mesin dan Industri UGM,
Yogyakarta, 234pp., ISBN 979-97986-0-4. |
|
115. |
A.E. Tontowi, M.W. Wildan, Subagyo, and R.R.A. Sriwijaya
(Eds.), 2003, Proceedings of AUN/SEED Net 2nd Field-Wise
Seminar on Materials and Manufacturing Technology,
Department of Mechanical and Industrial Engineering Gadjah
Mada University, Yogyakarta, 100pp., ISBN 979-98130-0-X. |
| |
|
|
PATENT |
|
116. |
Subagyo and G.A. Brooks, Online Measurement of Molten
Phases, Canadian Patent Application (Serial No.
PCT/CA03/01053), 10 July 2003 (United
States Patent 20060220281;
Europe Patent Application No.
03763539.8). |
|
|
|
|
